Home | About us | | Infrastructure | Quality | Contact us | Enquiry | Site Map

  Drop Forged Fittings
   Pressed Steel Fittings
   Cuplock System
   Jack and Base Plates
   Prop Sleeve Assembly
   Form Works
  Accessories
    Garden Fencing Hardware
   Laminated Wheels



 

 

  

Pressed Steel Fittings

 

Backed by a team of experts, we manufacture & export wide range of Scaffold Pressed Steel Fittings.

Pressed Double Coupler

EN-74 / BS-1139

Double Coupler connect two scaffold tubes at right angles. These are critical components in the scaffold structure and must be load bearing to resist both slip and distortion. The design is based on a strong one piece body with flaps and T-bolts hat can be removed for maintenance or replacement.

   

Pressed Double Coupler

EN-74 / BS-1139

Swivel Couplers connect two scaffold tubes at any angle to provide ledger, facade, or similar bracing. These are also key components in he structure and must also be load bearing. The body is firmly riveted to permit rotation and still ensures the minimum of further movement, for maximum rigidity. Again, the T-bolts can be removed for maintenance.

   

Gravlock Girder Coupler

AS - 1576.2

There is often a  requirement to fasten scaffold tubes to girders and other steel sections and it demnds a specialised fitting with a high degree of a versatility. The gravlock Girder Coupler has been specifically designed for attachment to either horizontal or vertical flanges, and will accommodate up to 43mm (13/4") in depth. In erection , the gravlock Coupler is highly effective, as it enables the fittings to be bolted to the girder first, leaving both hand free to present and secure the tube. As the tube s not compressed against the girder it is not distorted by the fastening process. Gravlock Couplers must be used in pairs.